Table of Contents
Advertisement
Radiant Assembly
IMPORTANT!
Before assembling the radiant, check that the radiant trays have not moved during transit. They
should sit securely on their locating pins in the base of the grill.
1 Locate the radiant in
the unit.
4 Place the 18 ceramic rods
onto the radiant.
If a ceramic rod breaks
1 Unlock radiant end cap by pushing it up with two fingers.
2 Replace broken ceramic rod.
3 Lock radiant end cap.
To order a replacement ceramic rod, please visit www.dcsappliances.com
22
INSTALLATION
2 Unpack ceramic rods
and remove radiant from
the unit.
5 Lock radiant end cap.
3 Unlock radiant end cap
by pushing it up with
two fingers.
6 Place the assembled
radiant into the unit.
Advertisement
Table of Contents
