Set Up Compuserve* 2000 With Iss - Intel AnyPoint Wireless II Network User Manual

Internet Service Provider Reference
To install AT&T WorldNet on ISS client PCs

Set up CompuServe* 2000 with ISS

To set up AT&T WorldNet on your AnyPoint Wireless II network:
On the ISS server PC, install AT&T WorldNet software. For more
1
information, refer to AT&T's documentation.
Copy the account.txt or att_account.txt file to a disk.
2
Note: If you don't know where the file is, use the Find feature in
Windows (Start > Find > Files or Folders) to locate it.
On an ISS client, begin installing the AT&T WorldNet software.
1
At the
2 Register Account
I would like to use
Select
3 By importing an account file
Insert the disk containing the account.txt or att_account.txt file into the
4
disk drive.
Note: Make sure the location of the account file reads
"a:\account.txt" or "a:\att_account.txt" (where "a" is the letter of the
disk drive). If it does not, click
drive.
Click , and follow the screen prompts to finish installation.
5 Next
Repeat steps 1-5 for each ISS client.
6
You can use a PC with a CompuServe* 2000 account as your ISS server
PC. For details on setting up ISS with earlier versions of CompuServe, see
the AnyPoint Wireless II Network Online Support site at
anypoint/support
Note: CompuServe 2000 doesn't appear in the ISP list in the ISS
setup program. To select CompuServe 2000 as your ISP, select
"America Online" from the drop-down list.
In addition to Internet access, CompuServe 2000 provides other services to
subscribers. Only the ISS server can use the CompuServe 2000 program to
access those services.
ISS clients can use programs such as Netscape Navigator or Microsoft
Internet Explorer to access the Internet.
screen, select
, and click
Next
Browse
and search for "CompuServe."
I already have an account that
.
, and click .
Next
, and locate it on your disk
www.intel.com/
CHAPTER 7
65