Remove Incompatible Network Adapters - Intel AnyPoint Wireless II Network User Manual

Troubleshooting

Remove incompatible network adapters

If the Setup program determines you have an additional network adapter,
the following screen appears.
To resolve the conflict between adapters:
If you already know which adapter in the list can be disabled, select
1
Some of these adapters are not used and can be disabled
not sure which adapter to remove or you need all of the adapters listed,
go to step 4.
If you have selected
2
, then click
disabled
adapters appears.
Select the adapter you want to remove, click
3
.
Continue
The Setup program continues with the software installation. Go back to
the Setup chapter, "Install the AnyPoint software" on page 11, and
continue with the instructions.
If you selected
4
. A dialog box appears that provides more information to help
Continue
you decide which adapter to disable.
Exit the Setup program and assign a different IP/Subnet address for the
5
the adapter. For instructions to do this, refer to the customer support
site:
www.intel.com/anypoint/support/.
Once you reach the support site, find the topic "I want to change my
adapter IP address."
Some of these adapters are not used and can be
. A screen showing the conflicting
Continue
All of these adapters used because
CHAPTER 6
. If you are
and then click
Disable
, then click
53