Set Up Parental Control - Intel AnyPoint Wireless II Network User Manual

Set Up the AnyPoint™ Wireless II Network

Set up Parental Control

See "What is Web
site filtering?" on
.
page 10
Setting up and changing the Parental Control password
Set up the Server and Client PCs
The Parental Control feature lets you filter the Web sites each PC can visit.
With Parental Control, you can assign different restrictions to each PC
running ISS. You can also specifically block or approve different sites. You
must use the ISS server to set up Web site filtering features. Also, client
PCs on the network must enter the Internet through the server for Parental
Control features to operate. If a client PC dials the Internet through a
separate modem, Parental Control features will not operate or protect the
client PC.
To set up a password:
Click
1 Start > AnyPoint software > Internet Sharing Server
Click the
2 Parental Control
Type a password and click OK.
3
The password can have up to 15 characters, including any combination
of letters (A-Z), numerals (0-9), and dashes (-)
To change the Parental Control password, click
type the old password, new password, and confirmation.
Before you can set up a client PC on the
Internet Sharing Server, launch a Web browser at a client PC and connect to
the Internet.
To set up the server and client PCs:
From the client PC, verify that you can access the Internet. Open your
1
Web browser and access any Internet site. The server PC connects and
the client displays the Web page.
From the ISS server PC, refresh the
2
tab and then click
You should now see the client PC you want to configure on the
Parental Control
tab.
Parental Control
).
Parental Control
tab.
. At the dialog box,
Change
tab of the
Parental Control
tab (click another
CHAPTER 2
.
23