Scan For Public Access Points - Intel AnyPoint Wireless II Network User Manual

CHAPTER 5

Scan for public access points

42
Refer to one of the remaining sections that best represents the type of
network profile you want to create. The steps in each section help you
select profile type, mode, and 802.11b settings for each.
Note: For information explaining the technical differences between
the mode variations, see page 3.
The
Profile Manager
button to scan for access points. If you want to see if any access points are
in range of your adapter, click the
To scan for public access points:
From the
1 Profile Manager
click . The
Scan
will see a listing of all access points in the area.
Click the access point you want to connect to.
2
Click
3 Connect
encryption is not needed for the access point, the
screen disappears and you will be connected.
Access Point
Managing your Wireless II Network
tab of the AnyPoint Connection Manager includes a
Scan
tab of the AnyPoint Connection Manager,
Detect Wireless Access Points
to obtain all the settings for that access point. If
button.
screen appears. You
Detect Wireless