Intel AnyPoint Wireless II Network User Manual page 53

Managing your Wireless II Network
Important: Data Encryption is the method that the wireless
communications industry uses to ensure secure transmission of
your data. It is an 802.11b standard.
Create and type an encryption password. The code you create must be
32 characters or less. The code is case-sensitive. Enter the same code
for all the peer PCs in the network.
For more information describing the encryption password, see What
are Wireless II adapter and operating system settings? on page 6.
If you are not concerned with security of your transmitted data, check
the
Disable Data Encryption
performance of any data transfer between PCs. Unchecking the box
will slightly decrease the performance, but will increase security. We
recommend leaving the box unchecked. Click
screen appears.
Click . Your profile will be added to the existing
9 Finish
tab of the AnyPoint Connection Manager.
Manager
If you want to activate the profile immediately, go to the AnyPoint
profile Manager tab, select the profile you created and click
you want to connect later, refer to Activate a profile on page 40.
box. This will slightly increase the
Next
CHAPTER 5
. The
Finished
Profile
. If
Activate
49