Set Up The Firewall - Intel AnyPoint Wireless II Network User Manual

CHAPTER 2

Set up the Firewall

See "What is a
Firewall?" on
.
page 9
20
The AnyPoint Connectivity Software Suite includes a Firewall, which
helps protect your network from hackers trying to gain access. By default,
the Firewall is enabled when you install the ISS server software.
Important: If you use a third-party Firewall product other than
BlackICE Defender (such as Norton Internet Security* or McAfee),
reinstall the ISS portion of the AnyPoint software after installing the
firewall software. Use the instructions in
software" on page 11
need to make additional configuration changes to use the other
manufacturer's Internet security software (see manufacturer's
manual) with your AnyPoint Wireless II Network.
If you already have BlackICE Defender* by NetworkICE installed on your
system, you may want to choose between AnyPoint or BlackICE Firewalls.
For details, review the following table.
If you have BlackICE
installed
and you want to use BlackICE
Uninstall BlackICE Defender
1
software using instructions
from the manufacturer.
Disable the Anypoint Firewall
2
through the ISS software (see
page 22).
Restart the PC.
3
Reinstall BlackICE Defender.
4
and you want the ISS Firewall:
Uninstall BlackICE Defender
1
software using instructions
from the manufacturer.
Restart the PC.
2
Install the AnyPoint Internet
3
Sharing Software (ISS) on the
Server PC.
Set Up the AnyPoint™ Wireless II Network
(be sure to install as an ISS server). You may
:
"Install the AnyPoint
If you do not have BlackICE
installed
and you want to use BlackICE
Disable the Anypoint Firewall
1
through the ISS software (see
page 22).
Restart the PC.
2
Install BlackICE Defender
3
software using instructions
from the manufacturer.
and you want the ISS Firewall:
Proceed with normal ISS
configuration instructions.
: