Configure The Internet Sharing Software (Iss) Server - Intel AnyPoint Wireless II Network User Manual

CHAPTER 2

Configure the Internet Sharing Software (ISS) server

See "What is
Internet Sharing
Software (ISS)?"
on page 9 .
18
Click . The
5 Next
shared printer, you need to map it. Printers are not mapped by default.
• Select the printer in the Unmapped Printers box then click the left
arrow to move it to the Mapped Printers box.
• Windows should start the Add Printer Wizard. Make sure you
have the printer software disks that came from the printer
manufacturer or with the printer. To add the printer, follow the
instructions on the screen.
Note: The screen does not appear if other networked PCs haven't
shared their printers, or if all other PCs are turned off.
To map another printer, repeat step 5.
Click after mapping to your printers and drives.
6 Finish
Your printers and drive shares are set up for Sharing and Mapping!
Now that you have finished installing the software and configuring shared
drives and printers, you are ready to configure the ISS server. This includes
configuring the network's:
• Connection settings
• Firewall
Set Up the AnyPoint™ Wireless II Network
Map Printers on Other PCs
screen appears. To use a