Intel AnyPoint Wireless II Network User Manual page 49

Managing your Wireless II Network
Enter these settings:
• Mode
• Network ID code (SSID)
• Transfer Rate
• Preamble (or header)
• Channel
For a description of each, click Help.
Click . The
7 Next
Select the encryption security level (either 40/64 bit or 128 bit). Select
8
the default encryption key (a number from 1 to 4). Then enter the
encryption key in hexadecimal characters. For more information, click
Help.
Note: The Hexadecimal character set consists of alpha-numeric
characters 0 through 9 and A through F.
Click . The
9 Next
to the profile list of the AnyPoint Connection Manager.
If you want to activate the profile immediately, go to the AnyPoint
profile Manager tab, select the profile you created and click
you want to wait and connect later, refer to Activate a profile on
page 40.
Encryption (WEP) Key
screen appears. Click
Finish
CHAPTER 5
screen appears.
to add your profile
Finish
Activate
. If
45