Intel AnyPoint Wireless II Network User Manual page 16

CHAPTER 2
See "Your
Wireless II
network adapter"
on page 2 .
The PC name
can have up to
15 characters,
including any
combination of
letters (A-Z),
numerals (0-9),
and dashes (-).
12
installation process. During installation, you will be making decisions that
will affect the way your network operates, so be sure to pay careful
attention to the screens.
Insert the AnyPoint Connectivity Suite CD in the CD-ROM drive.
1
Using Windows Explorer, double-click the CD-ROM drive, then
double-click
Setup
Click . An installation summary screen appears. Click
2 Install
license agreement screen appears.
If Setup detects an incompatible network adapter already installed on
your PC, the
More than one network adapter found
you receive this screen, refer to "Remove incompatible network
adapters" on page 53, which will show you how to resolve the adapter
conflict. If you do not receive this screen, go to the next step.
Click
3 I Accept
program exits. If you click
Click to select the default directory. The
4 Next
Assign a name to the PC. Be sure to use a different name for each PC
5
on the network. Make a note of the Workgroup name. All PCs
the same Workgroup name.
Important: If your ISP has named the PC, don't change the PC's
name.
Set Up the AnyPoint™ Wireless II Network
to begin. The main presentation screen appears.
or the agreement. If you decline, the Setup
I decline
Accept
screen appears. If
, the destination directory appears.
PC name
. The
Next
screen appears.
use
must