Share Drives And Printers - Intel AnyPoint Wireless II Network User Manual

Set Up the AnyPoint™ Wireless II Network
Important: Do
not click Cancel!
If you do, this PC
will not connect to
the network.

Share drives and printers

See "What is
sharing and
mapping?" on
page 8 .
Click then
11 Next
that your software has successfully installed. You will then be
prompted to restart the PC.
When your PC restarts, you are prompted to type a user name to log on
12
to the network.
The Windows user name can be
different from the PC name you
typed when you installed the
AnyPoint Wireless II Network
software. You do not need to
have different user names at
each PC, but you can if you
wish.
Note: At this point, your system includes a default network profile.
To view or edit those values, see
using the Wireless Control Panel tab" on page 39
The Sharing and Mapping Software lets you locate and use drives and
printers from several PCs as if they were on one single PC. The first time
you run the Setup program, the Sharing and Mapping Software runs
automatically (skip to step 2 below).
Important: Windows 2000 users should see
permissions error when running Windows 2000" on page 52
To share a drive:
Click
1 Start > Programs > Intel AnyPoint Network > Sharing and
Mapping Software
. A confirmation screen appears notifying you
Finish
Windows passwords are associated
with user names. If you don't create a
password now, you are not prompted
to type your user name each time you
restart this PC. If you create a
password, you must type the same
password each time you log on to this
PC with this user name.
"View and edit current settings
CHAPTER 2
.
"I have an insufficient
.
15