BLACK COALS / RIVER STONES PLACEMENT
•
Remove 2 bags of Black Coals / River Stones (24 pieces) and 2 bags of granules from the
accessory box.
•
Stack 18 pieces of Black Coals / River Stones evenly in two rows of 9 pieces each
(Approx. Gas 15 mm) on top of Ceramat® Burner as shown in Diagram A.
•
Place all the granules evenly on top of the Ceramat® Burner in the space between the Black Coals /
River Stones. Avoid pouring the granules directly onto the Ceramat® Burner as this may cause
blockage and poor combustion. Take care not to drop the Black Coals / River Stones on the Base
Panel, which contains Electronic Components.
•
Stack the remaining 6 Black Coals / River Stones on top of the bottom layer of Black Coals / River
Stones as shown in Diagram B.
•
Whilst placing the Black Coals / River Stones take care not to damage the
Ceramat® Burner.
WARNING
•
Do not operate the appliance if you observe any damage to the Ceramat®
Burner during installation or after use.
•
A damaged Ceramat® Burner could be dangerous. The Burner may need to be
replaced.
•
DO NOT operate the Constellation without either the Black Coals and/or River
Stones in place.
•
Use ONLY the Black Coals / River Stones provided.
•
DO NOT use heat beads or any other materials. Ensure to advise Customer of
this.
DO NOT FORGET TO PLACE GRANULES.
•
Place granules evenly on top of the Ceramat® Burner in the space between
NOTE
the Black Coals / River Stones. Other materials must not be used.
CONSTELLATION
CONSTELLATION
Rinnai Australia
CONSTELLATION
CONSTELLATION
- 18 -
Constellation Model 800/1000 - Installation Manual