Installation General; Product Specifications - Rinnai 800 Operation & Installation Manual

Decorative flame fire
Hide thumbs Also See for 800:
Table of Contents

Advertisement

INSTALLATION GENERAL

PRODUCT SPECIFICATIONS

Models: Constellation 800 / Constellation 1000 CONB (Black) / CONSS (Stainless Steel)
General
Inbuilt Radiant Decorative Effect Gas Flame Fire with natural draught flue
description:
system
Gas input rate:
High:
Low:
Burner pressure:
High:
Low:
Data plate:
On base panel to the right hand side of gas control
Gas control:
SIT modulating gas valve
Burners:
Intermittent pilot burner and Ceramat® main burner
Warm air
Top louvres
discharge:
Gas connection:
1/2" BSPT male union
Flue terminal:
Natural draft round top discharge flue
Inner - 200 mm Diameter
Outer - 250 mm Diameter
Power supply:
230 ~ 240V 50 Hz. Unit is supplied with 3 pin, 10 Amp plug and supply lead,
replace only with Rinnai Australia P/N. 90182065 and Rinnai NZ P/N. 6765B.
Fan:
Tangential 2 speed, power rating 60 Watts
Combustion
Ceramat® burner
system:
Black Coals /
Ceramic
River Stones:
Ignition system:
Continuous spark intermittent pilot ignition system
Operation:
Soft touch buttons and remote control to light pilot and burners
Safety devices:
Overheat thermal cutout switch / flame sensors
Combustion
Naturally aspirated burner
method:
Installation type:
Inbuilt only
Weight:
Constellation 800
Constellation 1000
Flue
A minimum vertical flue length of 3.6 m is required.
requirement:
A minimum of 1.2 m of vertical flue is required before any bends or offsets.
A maximum of two 45° bends may be used.
The manufacturer reserves the right to change or modify specifications without notice.
Ceramat® is a registered trademark of SCHOTT AG gas burner systems, Germany.
Improper installation, adjustment, alteration, service or maintenance can
cause property damage, personal injury or loss of life.
WARNING
Installation and service must be performed by an Authorised person.
Rinnai Australia
Model 800
Natural Gas
Propane
30 MJ/hr
30 MJ/hr
18 MJ/hr
18 MJ/hr
0.95 kPa
2.00 kPa
0.35 kPa
0.72 kPa
65 kgs
70 kgs
- 12 -
Constellation Model 800/1000 - Installation Manual
Model 1000
Natural Gas
Propane
40 MJ/hr
38 MJ/hr
24 MJ/hr
24 MJ/hr
0.87 kPa
2.10 kPa
0.34 kPa
0.85 kPa

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000

Table of Contents