Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 222

Operating menu
Thickness upper layer
Navigation
Prerequisite
Description
Additional information
Output current 1 to 2
Navigation
Description
Measured current 1
Navigation
Prerequisite
Description
222
 Diagnostics → Measured values → Thickness upper layer
Operating mode (→  144) = Interface or Interface with capacitance
Displays the upper interface thickness (UP).
UP Thickness upper layer
The unit is defined by the Unit after linearization parameter →  175.
 Diagnostics → Measured values → Output current 1 to 2
Shows the actual calculated value of the output current.
 Diagnostics → Measured values → Measured current 1
Only available for current output 1
Shows the current value of the current output which is currently measured.
Levelflex FMP51, FMP52, FMP54 HART
UP
UP
A0013313
Endress+Hauser