Advertisement
Hardware Connections
12
Connectors & Inputs table
Special care must be taken for the cables, wires and connectors to be used with the SP4.
Here is a description of the connectors pin out and recommendation for the wiring.
1.
To connect the ISP to an ampli er, you must use male
to female XLR cables. The connector in the ISP is a Male XLR.
We recommend up to 3m cables.
2.
In some cases, it might be required to
connect to ampli ers with unbalanced
inputs. In such case, the wiring should be
done as shown.
Inputs table
Connectors
56
Advertisement
