Advertisement
Welcome
Thank you for choosing a Bryston SP4
Immersive Sound Processor. This guide
provides step-by-step instructions for
setting up your SP4.
This guide will describe the setup of
the processor. The same process
applies to other variants with options installed.
Only the wiring and some elements of the
setup will di er.
We continuously strive to improve our products.
Some features might thus be added or be improved.
Make sure to check whether the installed rmware
version matches the installer guide version.
What's In the Box
Installer Guide
Safety Instructions
Rack mount ears **
* depending on the region, the power
cord will be delivered with Fuse to be
installed
** tools are required to mount/unmount
the rack mount ears:
Torx screwdriver (T10)
SP4 Immersive
Sound Processor
Firmware 3.3r1
Power cord *
2
Advertisement
