Advertisement
Web Installer Interface
7
Settings
Triggers
1
2
3
1
2
3
1
2
3
Parameters
Limiters
1.
Downmix output can be used with a screen. Selecting Audio/Video
Zone will add LipSync adjustment to the remote as well as general
AV Delay in Settings page.
2.
To avoid damage of speakers, the installer may decide to limit the
range of the audio adjustments available in the remotes (0 to 6dB).
3.
Master Volume can be decreased by a x amount of dB via a DIM
button on Remotes. De ne this level here. Default is -20dB.
1.
Limiters allow you to de ne a certain output level you don't
want the ISP to exceed. You can turn it ON here.
2.
The Limiter threshold can be set independently for normal
channels and subwoofer channels.
Adjust the level at which the limiters will start to work.
3.
There are two modes available in Sleep Mode: a low power consumption
one (slow start up, 40s) and a fast start up one (higher consumption, <5s).
Select whether to enable the Fast Boot mode here.
1.
Set Brightness level when adjusting through the Front Panel.
2.
Set Brightness level when in idle mode.
3.
Set time out between Active Mode and Idle Mode.
Front Panel
AV Delay
HDMI
16ch AES
40
Advertisement
