Advertisement
Web Installer Interface
5
Speakers setup
Depending on your SP4, your system will support up to 16 channels on Main Outputs
and 16 additional channels on Alternate Outputs for Dual Theater (with 16 Channel
RCA Outputs). For both sets of outputs, the Speakers con guration will follow the same ow,
as described below.
4
2
At this stage, you can decide to EDIT the Theater 1 if the Layout meets your requirements.
If the case, go to step 5.6 (Bass Management & Distance). If not, go to step 5.1 in next page.
Please note that in case «ISP-O-Dual Theater» option is installed (Alternate Speakers), you should make
!
sure before selecting EDIT that the current Preset (therefore Theater) playing is from the same channels
bank: Main or Alternate Speakers bank.
Theater con guration
Principles
Creation
Layout
1
1.
A single SP4 can manage several Theaters and switch from one to
the other during playback. A Theater can be de ned according to
a Speaker Layout. By default a Theater is proposed in a 2.0.0.0 layout.
2.
The mapping (Signal --> Output Channels) is shown on a per
Theater basis with di erent colour.
3.
Output mapping can be changed. See section 9 (p 43).
4.
New Theaters or Audio Zones (Mono/Stereo) can be added.
Speakers Adjustments
Bass
Distance
Replication
Management
Noise
Manual
Generator Levels Equalization
Audio
Zones
3
13
Advertisement
