Advertisement
Web Installer Interface
4
Inputs setup
Using the table you have lled up in previous step
of the ISP. By default, as many inputs as there are available physical connections have
been created. Follow the below steps to modify them.
1
i
For each input to de ne:
1.
Select a prede ned name or press Edit to change it.
2.
Select which physical inputs should be activated. For non HDMI audio inputs, you may still select a
video input. De ne what physical audio signal to play amongst Analog, Coaxial, Optical, HDMI
3.
To compensate for level di erence between inputs, you can adjust input level.
4.
To compensate for speci c synchronisation issue with the connected source, you
you can adjust an AV delay per input.
5.
Once de ned in Settings page (see part 7), you can con gure Triggers to activate
when the Input is selected.
6.
To complete the Inputs de nition, press SAVE then Main Speakers (8) to access next step.
To remove unused inputs so they are not visible in the Remote Controls, change them to NONE.
i
Inputs name
Sources assignment
2
Control
, you will now adjust the Inputs
1
3
4
Adjustment
5
12
Advertisement
