Advertisement
Room Calibration
6
Dirac Live ®
4.
After Optimization, the simulated
magnitude response curve is shown
in Green.
5.
You can tick in these boxes to visualize
di erent curves.
6.
You can browse the channels to check
simulated curves for each speaker.
For illustration of the correction
window e ect, it was here moved
i
so no correction were done above 2kHz.
Simulated response = actual response.
7.
You can also visualize the e ect in the
impulse response.
8.
Save your project.
9.
Proceed to the lter design Export
page.
To maintain overall signature and timber of high quality
speakers, and because the room has limited e ect in the
i
high frequency range, we recommend to limit the
window to below 1 or 2 kHz range as illustrated here.
Introduction
Setup
8
Measure
Optimize
5
4
7
Export
6
i
9
35
Advertisement
