Advertisement
Web Installer Interface
7
Settings
Triggers
1
Parameters
Limiters
1.
For each zone, adjust the Delay required to compensate
Audio and Video desynchronization due to the display.
The HDMI inputs can be con gured so to provide a better compatibility
between the source devices and the displays when issues such as blanked
video or snow noise are encountered due to HDCP interoperability problems.
1.
For the inputs de ned as HDMI2.0 compatible being by default
inputs 5 to 7 (or 1 to 7 when the HDMI2.0 extension setting «2» below
is set to ON), it is possible to limit the datarate to 450 MHz instead of
the default 600 MHz required for HDMI2.0.
2.
By default inputs 1 to 4 are limited to HDMI1.4 speeds (340 MHz datarate).
It is possible to set all inputs to accept HDMI2.0 speeds, de ned by the
setting «1» above between 450 MHz and 600 MHz. Be aware that changing
this setting requires source to be tested at the required resolution to
ensure proper behaviour of the whole HDMI chain.
Note: a change of these settings will force the unit to restart after SAVE operation.
Front Panel
AV Delay
HDMI
16ch AES
41
Advertisement
