Advertisement
Web Installer Interface
7
Settings
Triggers
In this Step, you will adjust the Settings of the SP4 by selecting the Settings tab.
Adjustment of Triggers are made as below:
1.
To allow manual change of a Trigger on the Remote, turn Manual Switching to ON
2.
To automatize the Trigger behaviour, there are three possible modes:
- on Wake = Trigger takes its active status at unit Wake Up,
- on Input = Trigger takes its active status when an Input is selected,
- on Presets = Trigger takes its active status when a Preset is selected.
3.
When Unit goes to Sleep mode, you can de ne how the Trigger should react.
4.
The Active Status can be de ned as 0V or 12V.
5.
Finally, it is possible to de ne a delay between the action occurence and the Trigger change
between 0 to 8s.
Parameters
Limiters
Front Panel
AV Delay
16ch AES
HDMI
39
Advertisement
