Advertisement
Room Calibration
6
Dirac Live ®
You have now done all the manual adjustments required to proceed with the Automatic Room
Calibration powered by the Dirac Live
that you are in possession of an Integrator Calibration Kit including:
®
1.
A Dirac Live
Room Calibration Tool with StormAudio license,
2.
The microphone UMIK-1 and its accessories.
If you do not have these two elements, we invite you to contact your distributor to acquire an
Integrator Calibration Kit or a Dirac Live
The Dirac Live
!
with Bryston drivers integrated, for sole use with Bryston processors.
Other versions of the Dirac LCT license will not work with the SP4.
Notes:
1.
Although recommended, you are not obliged to use the UMIK-1 USB microphone delivered in the
Integrator Kit. You can use your own measurement equipment as long as supported by the Dirac
®
Live
Room Calibration Tool for Bryston.
2.
The process described in this Guide will only cover our standard case based on using UMIK-1 USB
microphone.
3.
The next steps will describe a basic calibration using the standard target curve and automatic
correction window de ned by Dirac.
Introduction
Setup
®
Room Calibration Tool. Before proceeding, you must verify
®
Room Calibration Tool with StormAudio license alone.
®
Room Calibration Tool for Bryston is a speci c version of the tool,
Measure
Optimize
Export
27
Advertisement
