Factory Reset
Maintenance/Syslog
Syslog Protocol
Syslog Server
Syslog Level
Syslog Keyword Filter
Maintenance/Logcat
Clear Log
Log Tag
Log Priority
Resets the phone system to the default factory setting mode.
If the "Clear the SD card" is checked, the SD card storage mounted on the
phone will be format as well.
Select the transport protocol over which log messages will be carried.
•
UDP: Syslog messages will be sent over UDP.
•
SSL/TLS: Syslog messages will be sent securely over TLS connection.
To upload server CA certificate follow below steps:
✓ Copy CA file in SD card and plug it to the phone.
✓ Go to LCD menu Settings→Security Settings→Install from SD
card to install the CA file.
Configures the URI which the phone system will send the syslog messages
to. The default setting is "log.ipvideotalk.com".
Selects the level of logging for syslog. The default setting is "None". There
are 4 levels from the dropdown list: NONE, DEBUG, INFO, WARNING and
ERROR. The following information will be included in the syslog packet:
•
DEBUG (Sent or received SIP messages)
•
INFO (Product model/version on boot up, NAT related info, SIP
message summary, Inbound and outbound calls, Registration status
change, negotiated codec, Ethernet link up)
•
WARNING (SLIC chip exception)
•
ERROR (SLIC chip exception, Memory exception)
Note: Changing syslog level does not require a reboot to take effect.
Only send the syslog with keyword, multiple keywords are separated by
comma. Example: set the filter keyword to "SIP" to filter SIP log.
Clears the log files saved in the phone system.
Configures the filter to display the specified process log file.
Selects the log priority to display. It can be selected from:
•
Verbose
•
Debug
•
Info
•
Warn
•
Error
•
Fatal
•
Silent (suppress all output). The default setting is "Verbose".
GXV3240 Administration Guide
Version 1.0.3.207
P a g e
|
87