Grandstream Networks GXV3240 Administration Manual page 68

Use NAT IP
Permission to
Install/Uninstall Apps
Guest Login
Guest Login Timeout (m)
Guest Login PIN Code
SIP Domain
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Custom Certificate
Import Custom
Certificate
Trusted CA Certificates
Import Trusted CA
Certificates
Configures the IP address for the Contact header and Connection
Information in the SIP/SDP message. It should ONLY be used if it's
required by your ITSP. The default setting is keep the box blank.
Allows users to set permission to install/uninstall apps via web browser,
SD card and GS Market. The default value is 0.
Enables the desking mode. End users need to configure the SIP domain
or/and the SIP failover domain name before implementing this feature.
Users also should enter SIP username and password of the Primary server
or secondary SIP server manually on LCD after reboot the phone. The
default setting is "No".
Configures the timeout to quit the hot desking mode if there are not any
operations on the phone. The default setting is "Never".
Defines PIN code for guest login. If hot desking mode is enabled and guest
login timeout set to Never, user needs to enter the PIN code to login.
Default is NULL
Configures the SIP domain under Avaya mode. Fill in the SIP server
address to choose the registered server before login Avaya server. This
function should be used
Account→Network Settings.
Specifies SSL certificate used for SIP over TLS in X.509 format.
Specifies TLS private key used for SIP over TLS in X.509 format.
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
This feature allows user to upload custom certificate. The priority of
certificate is SIP TLS/Certificate/Private Key (Only SIP TLS used) >
Custom Certificate > Individual Certificate > General Certificate.
Uploads certificate file from PC using BROWSE button. The certificate file
should be ".pem", ".crt", and ".cer" or ".der" format. The Browse button will
turn to "Processing" and back to "Browse" once the uploading finished.
Note: Users can also delete uploaded custom certificate by clicking on
"Delete".
Uses the certificate for Authentication if "Check Domain Certificates" is set
to "Yes" under "Account" → "SIP Settings".
Uploads certificate file from PC using BROWSE button. The certificate file
should be ".pem", ".crt", and ".cer" or ".der" format. The Browse button will
turn to "Processing" and back to "Browse" once the uploading finished.
GXV3240 Administration Guide
Version 1.0.3.207
with Outbound Proxy option under
P a g e |
68