Grandstream Networks GXV3240 Administration Manual page 53

Caller Request Timer
Callee Request Timer
Force Timer
Enable 100rel
Caller ID Display
Use Privacy Header
Use P-Preferred-Identity
Header
Use P-Access-Network-
Info Header
Use P-Emergency-Info
Header
Otherwise, the phone system will use the SIP UPDATE or SIP OPTION
message. Default setting is "No".
Sets the caller party to act as refresher by force. If set to "Yes" and both
party support session timers, the phone will enable the session timer
feature when it makes outbound calls. The SIP INVITE will include the
content "refresher=uac". The default setting is "No".
Sets the callee party to act as refresher by force. If set to "Yes" and the
both parties support session timers, the phone will enable the session timer
feature when it receives inbound calls. The SIP 200 OK will include the
content "refresher=uas". The default setting is "No".
Configures the session timer feature on the phone system by force. If it is
set to "Yes", the phone will use the session timer even if the remote party
does not support this feature. If it is set to "No", the phone will enable the
session timer only when the remote party supports this feature. To turn off
the session timer, select "No". The default setting is "No".
Actives the PRACK (Provisional Acknowledgment) method. PRACK
improves the network reliability by adding an acknowledgement system to
the provisional Responses (1xx). It is set to "Yes", the phone system will
response to the 1xx response from the remote party. Default is "No".
Specifies which header tag will be used from the SIP INVITE message for
the Caller ID display. If it is set to Auto, the phone system will use the one
of the available headers in the priority hierarchy of P-Asserted Identify
Header, Remote-Party-ID header and FROM header. If it is set to "From
Header", it will use the FROM header information for the Caller ID. If it is
set to "Disabled", all the incoming calls Caller ID will be displayed with
"Unavailable". The default setting is "Auto".
Determines if the Privacy header will be presented in the SIP INVITE
message and if it includes the caller info in this header. If it is set to
"Default", the Privacy Header will be omitted in INVITE when "Huawei IMS"
special feature is active. If set to "Yes", it will always be presented. If set to
"No", it will always be omitted. The default setting is "Default".
Specifies if the P-Preferred-Identity Header will be presented in the SIP
INVITE message. If set to "default", the P-Preferred-Identity Header will be
omitted in SIP INVITE message when "Huawei IMS" special feature is
active. If set to "Yes", the P-Preferred-Identity Header will always be
presented. If set to "No", it will be omitted. The default setting is "Default".
Specifies if the P-Access-Network Header will be presented in the SIP
INVITE message.
Specifies if the P-Emergency-Info Header will be presented in the SIP
INVITE message.
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
53