Grandstream Networks GXV3240 Administration Manual page 71

Escape # as %23 in SIP
URI
Offhook Auto Dial
Offhook Auto Dial
Delay(s)
Offhook/Onhook
Timeout (s)
Enable Function for
Incoming Call
Mute Key Functions
While Idle
Dial DTMF Button Size
Dial DTMF Button
Color
Determines which characters will be included in the SIP INVITE URI if end
users input #. If it is set to "Yes", the phone system will replace the #
by %23. Otherwise, it will include # in the SIP INVITE message. The default
setting is Yes".
Configures the User ID/extension to dial automatically when the phone is
off-hook.
The phone will use the first account to dial the configured numbers out. The
default setting is "No".
Defines the timer for warm line dialing. After the timer expires, the phone
system will dial the configured number in off-hook Auto Dial automatically.
If it is not configured, the configured number will be dialed immediately.
If configured, the phone will exit the dial-up screen when timeout after
Offhook or Onhook. The default settings is 30s. The valid range is 10-60s.
Enables the preview feature for the incoming video calls. Defines the
function for the incoming video call. If it is set to "Preview", the phone
system will pop up the PREVIEW key on the LCD screen when there is an
incoming video call, and users could tap on it to check video caller without
answering the incoming video call (the call will keep playing ringback on
the caller side). The default setting is "None".
Note: By pressing the preview button, the phone will send the SIP 183
message to the caller's camera, based on SIP RFC3261; the caller's
camera should start then sending the stream to the phone.
At any time, the GXV32xx user can press the "Answer" button. If done then
the phone will send the SIP 200OK and call will be fully established.
Configures the mute key functions while the phone is in idle. Users could
set to "DND", "Idle Mute" and "Permanent Mute". If set to "DND", once
pressed the mute key, The DND mode will be on and incoming calls of all
accounts will be rejected; If set to "Idle Mute", once pressed the mute key,
users will answer all incoming calls in mute mood; If set to "Permanent
Mute", once pressed the mute key, users will answer/dial up all calls in mute
mood. All the press the mute key operations mentions above should be
done when the phone is in idle. The mute key function in a call is still
mute/unmute. The default setting is "DND".
Configures the size of the DTMF button on call interface. The default
settings is "Large".
Configures the color of the DTMF button on call interface. The default
setting is "Red".
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
71