7_4 Antenna Requirement; Canada - Ingenico Lane/5000 User Manual

7_3 ANTENNA REQUIREMENT
Federal Communication Commission Interference Statement 47 CFR
Section 15.203.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
7_4 WARNING TO USERS IN THE

CANADA

This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions : (1)
this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful
communication
7_5 Markings
The CE marking indicates that the terminal complies with harmonized
standards and requirements of European Directives on:
Radio and Telecommunications Terminal Equipment (R&TTE)
the protection of the health and the safety of the user and any
other person.
the protection requirements with respect to electromagnetic
compatibility.
RoHS (Restriction of Hazardous Substances)
The CE marking is the manufacturer's declaration that
the product meets the requirements of the applicable
EC directives. The CE mark is a mandatory conformity
marking for certain products sold within the European
Economic Area (EEA).
This TÜV symbol shows consumers at a glance that a
product has been examined by neutral experts and that
there are no safety concerns.
Lane/5000
900021971 R11 000 05/0917
Copyright© 2017 Ingenico
27
All rights reserved