7_4 Isc480 Quick Reference - Ingenico iPP320 Troubleshooting Manual

Depending on device configuration, a USB port and audio output connection are available on the side ports as shown in the below
image.
A cable retention bar secures cables to the terminal in order to prevent cables from becoming loose or damaged. When servicing
cables, this bar must be removed and then properly reinstalled when servicing is completed. Refer to the below image of the cable
retention bar.
To loosen the cable retention bar:
Turn the thumbscrew counterclockwise.
1.
Lift the cable up and away from the terminal.
2.
To reinstall the cable retention bar:
1. Position the cable retention bar on the terminal with cables aligned in their slots.
Turn the thumbscrew clockwise until tightened.
2.

7_4 iSC480 Quick Reference

The iS480 Quick Reference is organized into the following sections:
iSC480 Overview
44/57 Telium Troubleshooting Guide / June 28, 2014