Button Allocation - Ametek Solartron Metrology Wigauge WHT User Leaflet

7.4.

BUTTON ALLOCATION

Either button can be programmed to operate when pressed to perform the functions below.
7.4.1.
Send the current measurement each time the button is pressed or tag the current measurement if in streaming mode.
7.4.2.
Force the current measurement to Zero
7.4.3.
Force the current measurement to a Preset value.
7.4.4.
Allows the WHT measurement mode to be changed using the WHT buttons
7.4.5.
LCD display which shows current measurement mode and limits. It can be orientated via a serial command on the WHT manager software.
502848 Issue11 Wigauge User Leaflet
TRANSMIT A TAGGED READING
ZERO
PRESET
ADVANCED **
DISPLAY
Page 17