Troubleshooting Faq; I Cannot Get My Com Port To Work Properly; Why Is The Wht Measuring In The Opposite Direction To The One Expected - Ametek Solartron Metrology Wigauge WHT User Leaflet

9.

Troubleshooting FAQ

This section contains Troubleshooting solutions in an FAQ format.
9.1.

I cannot get my COM port to work properly?

If you have difficulty connecting the Bluetooth® WHT to your application software it may be because the default COM port is
being held by Windows. In this case use the custom setup and select a port manually.
9.2. Why is the WHT measuring in the opposite direction to the one
expected?
The WHT is factory configured to be functionally compatible with industry standard Internal Diameter gauge heads. This means
that the probe inside the hand tool will read a decreasing count as it's tip is pushed inwards. If using a gauge head that
measures an External Diameter or dimension, the SET DIRECTION command should be used to change the hand tool's
direction of count.
502848 Issue11 Wigauge User Leaflet Page 23