Battery Packs And Charging; Battery Packs; Removal And Replacement Of Battery Packs - Ametek Solartron Metrology Wigauge WHT User Leaflet

8.

Battery Packs and Charging

The Wigauge system can be supplied with different battery packs and chargers for different applications.
8.1.

Battery packs

There are two types of battery pack as shown in the table below.
Battery Pack
Standard Battery Pack
Inductive charged
battery pack
Note: Battery packs are supplied fully charged.
8.2.

Removal and Replacement of Battery Packs

Prior to removal ensure the tool and pack is clean to avoid
contamination of internal connectors
To remove the battery pack for replacement of charging turn the
locking screw 90 degrees anticlockwise. Then pull the battery pack
from the WHT.
To replace the pack onto the WHT ensure that the locking screw is in
the release position (see diagram), replace the pack onto the tool
and lock by turning the locking screw 90 degrees clockwise.
502848 Issue11 Wigauge User Leaflet
Description
Used with either a smart charger or
trickle charger connected via a jack
plug
Used with an inductive charger cradle
(no connection point for conventional
chargers is fitted)
Pack Colour
Mid grey
Dark Grey/Black
Capacity
8 hours continual running
5 hours continual running
Page 20