Ametek Solartron Metrology Wigauge WHT User Leaflet page 19

7.5.1.
The WHT Manager provides the user with a simple way to set up tools, log data, save their settings and observe the readings as they come in.
For further details see the WHT Manager Documentation provided with the Wireless Support Pack.
7.5.2.
The WHT can provide both visual and audible indications to the operator. Some of these indications can be switched On or Off using the Controller
Software. The table below summarizes the indications.
LED Colour
LED 1
(nearest Green
battery)
LED 2 Red
LED 3 Red
LED 4 Blue
502848 Issue11 Wigauge User Leaflet
WIRELESS HAND TOOL MANAGER OPERATING MODES
INDICATIONS
Indication Programmable
In Limits ON or OFF
Out of Limits ON or OFF
Not
Battery Status
Programmable
Power and Not
Bluetooth Status Programmable
Green for 3 seconds when button pushed and measurement in limit
Red for 3 seconds when button pushed and measurement in limit
OFF – Battery OK
Slow Flash – Battery Low Warning
Fast Flash – Battery requires charging (measurements disabled)
OFF – No Power
ON – Power ON
FLASHING, 2 times a second- Bluetooth Connection
FLASHING, 4 times a second - Awaiting passcode (if activated)
Function
Page 19