Step: 2
Remove the screws of Thermal Limiter which is
attached to the exhaust tube (See Fig. 1).
11.6 Heater Assembly
Accessibility (For Electric Models
- EFME617SIW / EFME517SIW /
EFME417SIW)
Step: 1
Remove 2 screws (1, 2) that fixes Heater Bracket with
the Base Panel and remove the wire clip (3).
Step: 2
Remove the screw which is fitted to the Inlet Air Duct
and remove the Heater Assembly from the machine.
From Heater Assembly, we can Access the following
components:
1.
Inlet Thermal Limiter
2. High-Limit Thermostat
Rear Panel Accessibility
11.6.1 Inlet Thermal Limiter
Accessibility
Remove the screws of Inlet
Thermal Limiter (See Fig. 1)
and unplug the connector of
Thermal Limiter (See Fig.2).
11.6.2 High-Limit Thermostat
Accessibility
Unplug the connectors of
Thermostat (See Fig. 1) and
remove the screw of High-Limit
Thermostat (See Fig. 2).
11.7 Heater Assembly Accessibility
(For Gas Models – EFMG617SIW
/ EFMG517SIW / EFMG417SIW)
Step: 1
Remove the screws (1, 2) that fixes Heater Bracket with
the Base Panel, then remove wire clip (3). (See Fig. 1)
31