Remove the Rear Panel cover screws which affixes
the Rear Bulk Head and Side Panels (See Fig. 1 and
Fig. 2).
NOTE
Gloves must be worn for accessing any
component inside the cabinet.
From the Rear Cover, you can access the following
components:
1.
Mist Valve
2. Inlet Control Thermistor
3. Outlet Control Thermistor
4. Fire Containment Thermostat
5. Outlet Thermal Limiter
6. Heater Assembly
11. Rear Panel Accessibility
NOTE
Hand Gloves must be worn for accessing any
component inside the cabinet.
11.1 Mist Valve Accessibility
Step: 1
Unplug the Mist Valve connector (See Fig. 1 and
Fig. 2).
Step: 2
Remove the screws that are fixed at the Rear Panel
Bulk Head (See Fig. 1), then twist and pull Mist Valve
along the direction shown (See Fig. 2).
Step: 3
Remove the Inlet tube from Mist Valve by pressing the
tube clip as shown (See Fig. 3).
29