Command 131: Abort Alarm Test - MSA FL500 UV/IR Operating Manual

Command Command
Number
201 Set Alarm High Delay
203 Set DIP Switch Override
204 Reset COPM Fault
205 Get Flame Device Info
* For event logs, Event 0 is the most recent event. Event 1 is the event just before that, and so forth.
9.1.

Command 131: Abort Alarm Test

Request Data Bytes
Byte Format
0 N/A
Response Data Bytes
Byte Format
0 N/A
Command-specific Response Codes
Code Class
0 Success
1-15
16 Error
17-127
Description
Sets the delay in seconds for the time between when an Alarm
Low event occurs until an alarm is activated
Refer to Section 9.25 "Command 203: Set DIP Switch Override"
for more information
Resets a COPM Fault condition
Refer to Section 9.27 "Command 205: Get Flame Device Info" for
more information
Description
N/A
Description
N/A
Description
No command-specific errors
Undefined
Access restricted
Undefined
FL500 HART® Communication Operating Manual
Device-specific Commands
US
11