Subscribe to Our Youtube Channel
Related Manuals for MSA FireHawk M7XT ExtendAire II
Summary of Contents for MSA FireHawk M7XT ExtendAire II
- Page 1 FireHawk M7XT ExtendAire II EBSS ® ™ (Emergency Breathing Support System) INSTALLATION, REPAIR AND SERVICE MSA 415 (L) Rev. 0 © MSA 2014 Prnt. Spec. 10000005389(I) Mat. 10158013 Doc. 10158013...
-
Page 2: Table Of Contents
CARE Technician according to the procedure 2. Remove the pull-strap from the outlined in this manual. friction buckle on the left FireHawk M7XT ExtendAire II EBSS Conversion Upgrade Kit includes: shoulder strap. • Pouch, P/N 10105836 •... - Page 3 Insert the right fold-over side of the Assembly to the PR14 First Stage Regulator hose restraint strap into the right 1. Position the air mask with the cylinder band facing up. center slot in the backplate. MSA 416 (L) Rev. 0 - 10158013...
- Page 4 NOTE: For rescue belts, pouch must be attached to the quick-release strap on the backside for the FireHawk Rescue Belt II (or to the auxiliary strap for the Rescue Belt I) MSA 416 (L) Rev. 0 - 10158013...
-
Page 5: Removing And Attaching Approval Labels
The FireHawk M7 / M7XT place, rub fingers over the entire Control Module or pressure gauge will indicate the pressure of surface of the label to assure that the system. it is completely smooth and attached. MSA 416 (L) Rev. 0 - 10158013... -
Page 6: Repair And Service
To Slide the o-ring over the threads install the pouch, refer to the Installing the FireHawk M7XT ExtendAire II and remove the thread protector EBSS Conversion Kit section of this manual.
Need help?
Do you have a question about the FireHawk M7XT ExtendAire II and is the answer not in the manual?
Questions and answers