Table of Contents
Advertisement
6.1.4 Info menu
Gives information about the instrument hardware and software, and allows the user to enter a descriptor for the
instrument. The normal 'Select, Scroll, Enter' editing technique, previously described) is used to edit those fields
that are not read-only.
Name
Type
Version
Bootrom
Company ID
Config Rev
Security Rev
Nvol writes
Line voltage
Wires Free
6.1.5 Upgrade
Caution: 1. Power must not be removed from the unit whilst upgrade is in progress, as to do
1
A
September 18
FEC920: USER GUIDE
Bootrom
Company ID
Config Rev
Security Rev
Nvol writes
Line Voltage
Wires Free
Figure 42 Info menu (expanded to show all fields)
Allows the user to enter a descriptor of up to 20 characters, using the text entry techniques
described in Section 5.6. The number of characters visible in the display mode pages
varies according to the number of alarm symbols on display.
Nano. Read-only display of the instrument model (used by 'iTools').
Read-only. The software version of the instrument.
Read-only. Instrument software Boot ROM version
Read-only. For CNOMO
Read-only. This value is updated, and a message including this value generated, every
time configuration is exited, if any one or more configuration parameter has been
changed.
Read-only. This number is incremented every time configuration is exited, if any one or
more passwords has been changed, or if the FTP Server username has been changed,
or if the Comms Enable field has been edited.
Number of non-volatile write operations for diagnostic purposes.
The instantaneous value of the supply voltage applied to the instrument. Used in some
control loop operations.
This shows the number of wires free to be used. The value takes into account all user
wiring whether carried out at the instrument or downloaded from the iTools graphical
wiring editor.
so will cause permanent damage to the unit.
2. For USB upgrades, the memory stick must not be removed whilst upgrade is in
progress or the instrument will be permanently damaged.
A5E45696052A Rev-AA
Instrument.Info
Name
FEC920
Type
FEC920
Version
2.0
1.8
1280
10
2
339
239.2 v
240
1
purposes over Modbus (1280 decimal; 0500 hex).
Page 51
Advertisement
Table of Contents
