Display Modes - Siemens FEC920 User Manual

Flow energy calculator
Hide thumbs Also See for FEC920:
Table of Contents

Advertisement

Access
Access
Access
Access
Access
Access Engineer
Password
* If the Auditor feature is enabled,
the Operator user is not displayed. If
the Auditor feature is not enabled,
the <User> user is not displayed.
To log in as Engineer (default password = 100):
1.
Operate the up arrow key three times, to display 'Engineer'.
2.
Press the scroll key to call the 'alpha' keyboard, with the letter 'q' highlighted.
3.
Use the down arrow key three times to highlight 'Numeric'.
4.
Operate the scroll key to display the numeric keyboard (numeral '1' highlighted.)
5.
Operate the scroll key to enter '1', then use the up arrow key nine times to highlight numeral '0' and use
the scroll key twice to enter '0' 0', completing the password of 100.
6.
Use the Page key to call the confirmation display.
7.
If the password entry is as required, use the up arrow twice (or the down arrow once) to highlight the word
'Yes' and operate the scroll key to confirm. The top level configuration menu appears. Otherwise, 'Cancel'
can be used to clear the entry in order to start again, or 'No' can be used to quit login.
5.4

DISPLAY MODES

The following subsections describe the various display modes available to the user. By default, the 'Home'
display mode is 'Vertical Trend', but this can be edited as a part of 'Instrument.Display' configuration (Section
6.1.3). This configuration area also allows the user to disable one or more display modes should they not be
required.
The current display mode can be chosen either by using the top level menu 'Go to View' item or, from any
display mode, by scrolling through the enabled modes using the up or down arrow buttons.
Details of the various display modes are to be found in the following subsections:
Vertical trend ................................... Section 5.4.1
Horizontal
trend...............................
Vertical
bargraph.............................
Horizontal
bargraph.........................
Page 30
FEC920: USER GUIDE
Logged out
<User>
*
Operator
*
Supervisor
Engineer
Figure 16 Log in Menu
Section 5.4.2
Section 5.4.3
Section 5.4.4
A5E45696052A Rev-AA
Password
Password
Accept changes
Cancel
No Yes
Numeric ........................................... Section 5.4.5
Alarm panel
.....................................
Modbus
Master................................
EtherNet/IP
......................................
Section 5.4.6
Section 5.4.7
Section 5.4.8
A
September 18

Advertisement

Table of Contents
loading

Table of Contents