Key Descriptions - Adam Equipment GBC Series User Manual

4.0 KEY DESCRIPTIONS
Keys
[0‐9, .]
[CE]
[M+]
[MR]
[Pst]
[Print]
[Smpl]
[U.Wt./Units]
[Tare]
[Zero]
Numeric entry keys, used to manually enter a value for tare weights, unit
weight, and sample size.
Used to clear the unit weight or an erroneous entry.
Add the current count to the accumulator. Up to 99 values or full capacity of
the weight display can be added. Also prints the displayed values when Auto
print is switched off.
To recall the accumulated memory.
To set the upper limit for the number of items counted. When this upper limit
is exceeded the scale will sound the beeper.
To print the weight/ unit weight and count to a PC or printer using the RS‐232
interface. Print the totals from memory when [MR] is pressed first.
Used to input the number of items in a sample.
Used to enter the weight of a sample manually.
Select the weighing unit when the "Unit Weight" display is at zero if enabled.
Tares the scale. Stores the current weight in memory as a tare value, subtracts
the tare value from the weight and shows the results. This is the net weight.
Entering a value using the keypad will store that as the tare value.
Sets the zero point for all subsequent weighing to show zero.
Functions
© Adam Equipment Company 2011