Scanning Setup Overview - Xerox VersaLink Series System Administrator Manual

Scanning

Scanning Setup Overview

If the printer is connected to a network, it is enabled for scanning. Before you can scan, do the
following:
• If you are scanning to a shared folder on your computer, share the folder, then set the correct
permissions. In the Embedded Web Server, add a Network (SMB) destination to your Address Book
entry.
• If you are scanning to an FTP server, in the Embedded Web Server, add the FTP server to your
Address Book entry.
• If you are scanning to an email address, in the Embedded Web Server, configure the email server.
122 Xerox ® VersaLink
System Administrator Guide
® Series Multifunction and Single Function Printers