Physically Connecting The Printer - Xerox VersaLink Series System Administrator Manual

Initial Setup

Physically Connecting the Printer

1. Connect the power cord to the printer, then plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly-configured network port.
3. If your printer has fax installed, connect it to a correctly-configured telephone line.
4. If your printer has fax installed and is intended to send or receive faxes, connect it to a telephone
that is configured for fax.
5. Power on the printer.
10 Xerox ® VersaLink
System Administrator Guide
® Series Multifunction and Single Function Printers