Xerox VersaLink Series System Administrator Manual page 62

Network Connectivity
8. If needed, for Default Trap Community Name, type an SNMP trap name.
9. In the System Administrator Login ID area, type the login ID for the administrator.
10. You can set Trap Destinations for LAN1 and Wi-Fi. For Trap Destination:
• Click an available field.
• Select the address type. Options include IPv4, IPv6, or Host Name.
• For IP Address/Host Name and Port, type the IP address or the network host name for the Trap
Destination, then type the port number.
• For Trap Community Name, type a name.
• For Traps to Be Received, select the traps that the SNMP manager receives. For each item,
enable the toggle button.
• Click OK.
11. Click OK.
C C o o n n f f i i g g u u r r i i n n g g S S N N M M P P v v 3 3
SNMPv3 is the current standard version of SNMP defined by the Internet Engineering Task Force
(IETF). SNMPv3 provides three important security features:
• Message integrity to ensure that tampering with a packet does not occur during transit
• Authentication to verify that the message is from a valid source
• Encryption of packets to prevent unauthorized access
Note:
• Ensure that HTTPS SSL communication is enabled. For details, refer to
Settings in the Embedded Web
• To use SNMPv3 in FIPS Mode, enable FIPS 140-2. For details, refer to
E E d d i i t t i i n n g g S S N N M M P P v v 3 3 P P r r o o p p e e r r t t i i e e s s
Note:
• To change the settings for SNMPv3, first enable HTTPS (SSL) communication. For details,
refer to Enabling HTTPS at the Control
• To use SNMPv3 in FIPS mode, first enable FIPS 140-2. For details, refer to
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Protocols area, click SNMP.
3. For Port, select the toggle button.
4. Click SNMPv3.
5. For Enable (Read), select the toggle button.
6. To enable write access, for Write, select the toggle button.
62 Xerox ® VersaLink
System Administrator Guide
Server.
® Series Multifunction and Single Function Printers
Panel.
Configuring HTTP
FIPS 140-2.
FIPS 140-2.