Xerox VersaLink Series System Administrator Manual page 154

Accounting
Network Accounting
To enable accounting through a network server:
1. In the Embedded Web Server, log in as administrator, then click Permissions→Accounting
Method.
Note: If you previously set up an accounting method, click
Permissions→Accounting→Accounting Method.
2. In the Accounting Method area, for Network, click Select.
To specify a network server to monitor the accounting:
1. In the Limits area, click Setup.
2. In the Limits Server area:
• For Server URL, type a URL for the network server that manages accounting.
• For Timeout, type the number of seconds that the printer waits idle before it disconnects from
the server.
3. In the What to Limit area:
• To select functions to monitor, click the Enable toggle buttons.
• If you selected Prints as a function to monitor, in the Job Limit Communication Error Handling
section, select an action to perform in response to an error.
4. Click OK.
You can configure aspects of the login screen on the control panel. To configure this information:
1. In the Tracking Information area, click Edit.
2. To display information for a user, in the User ID area:
• For Default Label, type the label that appears above the login field on the control panel.
• For Default Value, type the default login string that appears in the login field on the control
panel.
• To require users to log in to the printer to retrieve usage information, for Ask Users, click the
Enable toggle button.
• To prevent login information from appearing on the control panel, for Mask Input, click the
Enable toggle button.
3. To display information for a General Account, in the Account ID area:
• For Default Label, type the label that appears above the login field on the control panel.
• For Default Value, type the default login string that appears in the login field on the control
panel.
• To require users to log in to the printer to retrieve usage information, for Ask Users, click the
Enable toggle button.
• To prevent login information from appearing on the control panel, for Mask Input, click the
Enable toggle button.
4. In the When to Prompt area, click each type of service, then select an option.
5. Click OK.
154 Xerox ® VersaLink
System Administrator Guide
® Series Multifunction and Single Function Printers