Description - Hirschmann RS20 series User Manual

1

Description

You can choose from between a wide range of variants. You have the option
to set up your device individually based on different criteria:

Number of ports

Transmission speed

Media type
 Types of connectors
 Temperature range
 Certifications
 Software variant
The RS20/22/30/32/40 devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility.
The devices allow you to set up switched industrial Ethernet networks that
conform to the IEEE 802.3 standard.
The devices work without a fan.
The voltage is supplied redundantly.
The following installation options are available:
 simply snapping them onto a DIN rail
 mounting them on a wall (only RS22/RS32)
Depending on the device variant, you can choose various media to connect
terminal devices and other infrastructure components:

twisted pair cable

multimode F/O

singlemode F/O
The twisted pair ports support:

Autocrossing

Autonegotiation

Autopolarity
There are convenient options for managing the device. Administer your
devices via:
 a Web browser
 Telnet
 SSH
 HiDiscovery (Software for putting the device into operation)

network management software (e.g. Industrial HiVision)

a V.24 interface (locally on the device)
The ring redundancy concept allows the network to be reconfigured quickly
after a failure.
Installation RS20/22/30/32/40
Release 05 12/2015
19