Telnet/Web Access; Description Of Telnet Access - Hirschmann RS20 Reference Manual

Security

2.3 Telnet/Web Access

2.3 Telnet/Web Access
This dialog allows you to switch off the Telnet server and the Web server on
the device.
Figure 17: Telnet/Web access dialog

2.3.1 Description of Telnet access

The Telnet server of the device allows you to configure the device by using
the Command Line Interface (in-band). You can deactivate the Telnet server
to prevent Telnet access to the device.
On delivery, the server is activated.
After the Telnet server has been deactivated, you will no longer be able to
access the device via a new Telnet connection. If a Telnet connection already
exists, it is kept.
RM Web L2E
43
Release 5.0 04/09