Hirschmann RS20 series User Manual page 76

Fast Ethernet SFP transceiver
M-FAST SFP-TX/RJ45
M-FAST SFP-TX/RJ45 EEC
The following operating conditions apply to twisted pair transceivers:
 Usable with:
- HiOS as of software version 03.0.00
- for PRP ports on RSP devices, as of software version 02.0.01
- for PRP ports on EES devices, as of software version 02.0.02
- Classic switch software as of software version 08.0.00
- HiSecOS ab Software-Version 01.2.00
 Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.

Not applicable for combo ports.
 Not applicable for ports which support only Gigabit Ethernet.
 To set autocrossing manually is currently not possible.
M-FAST SFP-MM/LC
M-FAST SFP-MM/LC EEC
M-FAST SFP-SM/LC
M-FAST SFP-SM/LC EEC
M-FAST SFP-SM+/LC
M-FAST SFP-SM+/LC EEC
M-FAST SFP-LH/LC
M-FAST SFP-LH/LC EEC
Special accessories for the device variants RS22/RS32
Wall mounting plate in DIN rail design, width 4.72 in. (120 mm)
Wall mounting plate for DIN rail mounting, width 3.54 in. (90 mm)
RPS 90/48V HV (high-voltage) PoE power unit
RPS 90/48V HV (high-voltage) PoE power unit with conformal coating 943 979-101
RPS 90/48V LV (low-voltage) PoE power unit
RPS 90/48V LV (low-voltage) PoE power unit with conformal coating 943 980-101
Other accessories
AutoConfiguration Adapter ACA21-USB (EEC)
Terminal cable
6-pin terminal block (50 pcs.)
Rail Power Supply RPS 30
Rail Power Supply RPS 80 EEC
Rail Power Supply RPS 120 EEC (CC)
Industrial HiVision Network Management Software
OPC server software HiOPC
76
Order number
942 098-001
942 098-002
943 865-001
943 945-001
943 866-001
943 946-001
943 867-001
943 947-001
943 868-001
943 948-001
Order number
943 971-001
943 971-002
943 979-001
943 980-001
Order number
943 271-003
943 301-001
943 845-006
943 662-003
943 662-080
943 662-121
943 156-xxx
943 055-001
Installation RS20/22/30/32/40
Release 05 12/2015