Hirschmann RS20 series User Manual page 75

Order numbers/product description

The order numbers correspond to the product codes of the devices.
See "Combination options of the device variants
RS20/RS30/RS22/RS32" on page 23.
See "Combination options for the RS40 device variants" on page 26.
Accessories

Note that products recommended as accessories may have different
characteristics to those of the device, which may limit the application
range of the overall system. For example, if you add an accessory with IP
20 to a device with IP 65, the IP of the overall system is reduced to 20.
Gigabit Ethernet SFP transceiver
M-SFP-TX/RJ45
The following operating conditions apply to twisted pair transceivers:
 Usable with:
- HiOS as of software version 03.0.00
- Classic Switch software, as of software version 04.1.00.
- HiSecOS as of software version 01.2.00
Do not use with the following devices:
- SPIDER II
- MSP/MSM
- EES
 Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.

Not applicable for combo and Fast Ethernet ports.

Only support of the autonegotiation mode including autocrossing.
M-SFP-SX/LC
M-SFP-SX/LC EEC
M-SFP-MX/LC EEC
M-SFP-LX/LC
M-SFP-LX/LC EEC
M-SFP-LX+/LC
M-SFP-LX+/ LC EEC
M-SFP-LH/LC
M-SFP-LH/LC EEC
M-SFP-LH+/LC
Bidirectional Gigabit Ethernet SFP transceiver
M-SFP-BIDI Type A LX/LC EEC
M-SFP-BIDI Type B LX/LC EEC
M-SFP-BIDI Type A LH/LC EEC
M-SFP-BIDI Type B LH/LC EEC
M-SFP-BIDI Bundle LX/LC EEC (type A + B)
M-SFP-BIDI Bundle LH/LC EEC (type A + B)
Installation RS20/22/30/32/40
Release 05 12/2015
Order number
943 977-001
943 014-001
943 896-001
942 108-001
943 015-001
943 897-001
942 023-001
942 024-001
943 042-001
943 898-001
943 049-001
Order number
943 974-001
943 974-002
943 975-001
943 975-002
943 974-101
943 975-101
75