Connecting The Ferrite; Operating The Device - Hirschmann RS20 series User Manual

2.7

Connecting the ferrite

Note: For PoE devices with 16 or more ports
(RS22-16..., RS22-17..., RS22-24... and RS22-25...):
To adhere to EMC conformity, you connect the ferrite supplied to the voltage
input via the power supply cable.
 Insert both cables of the 48V output through the ferrite twice.
 Lock the ferrite.
 Position the ferrite as close as possible to the voltage input (max. distance
19.7 inches (50 cm)).
To open the ferrite use the key supplied.
2.8

Operating the device

 By connecting the supply voltage via the terminal block, you start the
operation of the device.
Installation RS20/22/30/32/40
Release 05 12/2015
57