Minimum Firebox Clearances Diagram
The following diagram shows the minimum clearances to the sides and back of any built-in ORTAL
fireplace.
NOTES:
•
The clearances mentioned in the diagrams on the immediately previous page apply to the front
of the firebox.
•
The 12" clearance spans from the top of the fireplace viewing area to the bottom of the framing.
•
The 9-13/16" clearance spans from the bottom of the legs to the bottom of the fireplace viewing
area. Legs are not removable or adjustable.
•
While not shown in this diagram, a heat release is required for all built-in ORTAL appliances (see
section labeled "Heat Release" details). An air intake is also required for all built-in ORTAL
fireplaces with the double glass heat barrier (see section labeled "Air Intake" details).
Ortal Installation Manual: Built-in Models, September 2018
27